2015 Ford Escape
Mileage
167,803
Service Date
12/18/2024
Services Performed
- Remove any components necessary to gain access to the horn. Disconnect the electrical wires connected to it, remove the mounting bolts holding it in place. Install the new horn, reconnect or replace the wires, and test the functionality by turning on the ignition.
- Remove all necessary components in the cowel area (washer jets and plumbing, harnesses, cowel inlet screens, and wiper arms), in order to access the vehicles wiper motor cavity. Remove the wiper transmission and all associated linkages and remove the electrical connector attached to the wiper motor. Remove the wiper motor and wiper transmission from the vehicle and transfer the transmission to the new wiper motor. Time the components to the replacement motor so that the assembly is properly timed. Install the assembly back into the vehicle, and clean and tighten the electrical terminals to ensure proper mating between the new motor and the existing wiring harness. Run full tests on the wiper circuit to ensure all components function properly. Install all previously removed components back to their original state and verify proper operation of the wiper system and supporting components.
Jennifer B. gave our service a 5 star review on 12/18/2024
