2009 Jeep Compass
Mileage
178,870
Service Date
9/9/2024
Services Performed
- Clean the exterior of the power steering pump housing at the lines attachment points to prevent foreign material from entering the system. Disconnect the return line at the pump. Clean the threads on the lines and flush the system. Remove the line and install the new line. Road test the vehicle to verify correct operation of the power steering system and recheck the system for the correct fluid level as well as to ensure there are no leaks from the power steering system.
- Check the vehicles under hood fluid levels and remove the oil fill cap and breather assemblies (where applicable) Remove the vehicles engine oil drain plug, and drain the contents of the engines oil pan or sump. Remove the filter assembly and clean the sealing surfaces of the housing for reinstallation. On cartridge equipped vehicles, replace the housing O rings and clean the debris from the housing and relief valves. Lubricate the O rings on the housing and or the filter assembly and replace the filter or element. Clean and inspect the oil drain plug gasket, and check the threads in the engines oil pan. Torque the plug to the manufacturers specification using a new gasket where required. Clean the grease zerks to remove debris, and lubricate all accessible fittings on the vehicles steering, suspension, driveline and chassis components. Check and or set the tire pressures and relearn the TPMS system where required. Fill the engine with the manufacturers specified type, grade, and viscosity engine oil and verify level after purging the new filter. Check and or top off all low fluid levels and reset the maintenance reminder system where applicable. Note. Some vehicles maintenance reminders do not take on initial reset. If your maintenance light happens to come on following an oil service, please give us a call so we can correct it.
Charlie N. gave our service a 5 star review on 9/10/2024
