2018 GMC Canyon
Mileage
79,053
Service Date
8/12/2025
Services Performed
- Install refrigerant recycling equipment on the system and remove any remaining system pressure and oil. Clean all exterior connections requiring servicing to remove debris. Vacuum system for 90 minutes to remove any moisture. Fill system to capacity with new esther oil, dye, and refrigerant. Clean condenser fins and inlet and outlet air passages. Run engine to operating temperature and monitor system pressures. Check the operation of the condenser fan, blend door, and check and verify vent temperatures. Check for leaks using dye detection light and insure that all system components are dry. No leaks are present at this time. If the system performance decreases, the customer should return for additional leak testing.
- Install data scanner and engine analyzer. Run tests on the fuel, ignition, and computer control systems. Retrieve fault codes from the processors memory. Codes exist in the system for >>>>>>>>>>>>>. Perform all necessary pin point tests checking the wiring, grounds, relays, and related circuit components to isolate the problem to <<<<<<<<>>>>>>>>.
Melissa S. gave our service a 5 star review on 8/12/2025
