- Check for the source of the leak and found a large screw in the tread area. The hole is larger than normal and a plug will be installed but the tire should be replaced as well as the other tires due to low tread depth. Fill the tires to specification and reset the TPMS system to confirm repairs.
- Remove calipers, clips, and bracket assemblies. Remove the rear disc brake pads and clean and lubricate the caliper slides. Disassemble the rear emergency brake components, and clean and lubricate all associated hardware and linkages. Reassemble the emergency brake assemblies, and deglaze the emergency brake shoes. Set the shoe width to fit the inside diameter of the rotor assemblies, and verify the adjustment. Machine, Deglaze, or Replace the rear brake rotors and install new brake pads. Perform all necessary system adjustments and vacuum bleed the brake calipers. Top off the master cylinder to proper level, and road test vehicle.
Charlie N. gave our service a 5 star review on 7/3/2020