2008 Honda CR-V
Mileage
252,837
Service Date
7/21/2025
Services Performed
- Remove necessary shields to access the pressure ports. Install manifold gauges and monitor systems static and dynamic system pressures. Check all air conditioning electrical system components including switch, relays, and pressure switches. Add refrigerant to the system if necessary for leak testing and inject the system with luminescent dye. Check the system for refrigerant leaks using dye detection equipment. Check hoses, clamps, evaporator drain, condenser, receiver dryer, and expansion valve for leaks. <<<<<<<<<<>>>>>>>>>>>
- Perform full system evacuation. (See system evacuation and recharge op) Remove front valence, radiator support mounts and electric cooling fan modules if applicable. Drain engine coolant and flush system in both directions with water to remove sediment. Remove vehicles radiator assembly to access the condenser. Apply penetrant to condensers captured fittings and replace all O ring seals. Install new condenser assembly and tighten fittings. Reinstall vehicles radiator, valence, shields, and fan modules. Top off cooling system to capacity with specified amount and type of new engine coolant. Run engine to circulate coolant and check freeze point and acidity to insure a proper mixture is in the system. Run engine to operating temperature and purge air from system. Recharge air conditioning system (see evacuation and recharge op) Check system for leaks and road test.
Walt A. gave our service a 5 star review on 7/21/2025
